Subaru Project – Part 3 of 7: Final Assembly

by .

When we left off with Part 2 the Subaru project, Kyle had picked up the assembled longblock from Moore Performance and put it on the engine stand in his garage. For Part 3, we’ll take a look at pictures and notes from his assembly process, and check out what other Fel-Pro gaskets are being used […]

Subaru project – Part 2 of 7: Still plays with blocks

by .

In Part 1 of the Subaru project, Kyle verified that the factory head gaskets had failed on his 2005 WRX STi. He decided to use Fel-Pro® PermaTorque® MLS head gaskets (and other Fel-Pro gaskets, which we’ll cover in Part 3) for the rebuild.   Right now we’re going to look at the prep work and assembly, […]

Subaru Project Part 1 of 7: Time to Decide

by .

  When Kyle, the owner of this 2005 Subaru found the engine overheating and engine oil/combustion gasses in the coolant, he had a feeling he was going to be replacing the head gaskets. Over the next few months, we’ll be sharing the build story of his 2005 Subaru WRX STi as it’s rebuilt to handle […]