Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Head gasket
#1
Just order a 7277b for a 8n. Now in the past on other gaskets I've used a copper sprays sealant do guy recommend doing this or no
Reply
#2
Hi,

This gasket should not have any sort of copper or other spray sealant applied to it. This gasket has our trademark Blue Stripe coating, which is a Teflon coating we apply to the gasket that conforms to micro-imperfections in the head & block to help with sealing. Some spray coatings can dissolve the coating we have applied. Install the gasket on clean & dry surfaces. Please note the gasket is marked on one side indicating which side should face up.
Reply


Please note that new posts in this forum must be approved by a moderator before becoming visible.
[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.

Forum Jump:


Users browsing this thread: 1 Guest(s)